|
1W, High Isolation SIP, Single & Dual Output DC/DC Converters | |
|
|
| Key Features |
| ‧ Efficiency up to 81% |
| ‧ 3000VDC Isolation |
| ‧ MTBF > 2,000,000 Hours |
| ‧ Low Cost |
| ‧ Input 5, 12 and 24VDC |
| ‧ Output 3.3, 5, 9, 12, 15, ±5, ±9, ±12 and ±15VDC |
| ‧ Temperature Performance -40°C to +85°C |
| ‧ UL 94V-0 Package Material |
| ‧ Internal SMD Construction |
| ‧ Industry Standard Pinout | |
| |
|
|
|
Model Number |
Input Voltage |
Output Voltage |
Output Current |
Efficiency |
Load Regulation |
|
VDC |
VDC |
mA |
% Typ. |
% Max. |
|
MAU201 |
5
( 4.5 – 5.5 ) |
3.3 |
260 |
73 |
10 |
|
MAU202 |
5 |
200 |
71 |
10 |
|
MAU203 |
9 |
110 |
76 |
8 |
|
MAU204 |
12 |
84 |
78 |
7 |
|
MAU205 |
15 |
67 |
78 |
7 |
|
MAU206 |
±5 |
±100 |
72 |
10 |
|
MAU207 |
±9 |
±56 |
77 |
8 |
|
MAU208 |
±12 |
±42 |
78 |
7 |
|
MAU209 |
±15 |
±34 |
79 |
7 |
|
MAU211 |
12
( 10.8 – 13.2 ) |
3.3 |
260 |
74 |
8 |
|
MAU212 |
5 |
200 |
73 |
8 |
|
MAU213 |
9 |
110 |
78 |
5 |
|
MAU214 |
12 |
84 |
80 |
5 |
|
MAU215 |
15 |
67 |
80 |
5 |
|
MAU216 |
±5 |
±100 |
74 |
8 |
|
MAU217 |
±9 |
±56 |
79 |
5 |
|
MAU218 |
±12 |
±42 |
81 |
5 |
|
MAU219 |
±15 |
±34 |
81 |
5 |
|
MAU221 |
24
( 21.6 – 26.4 ) |
3.3 |
260 |
73 |
8 |
|
MAU222 |
5 |
200 |
71 |
8 |
|
MAU223 |
9 |
110 |
76 |
5 |
|
MAU224 |
12 |
84 |
78 |
5 |
|
MAU225 |
15 |
67 |
79 |
5 |
|
MAU226 |
±5 |
±100 |
72 |
8 |
|
MAU227 |
±9 |
±56 |
76 |
5 |
|
MAU228 |
±12 |
±42 |
79 |
5 |
|
MAU229 |
±15 |
±34 |
80 |
5 | |
| | |
|
|
Minmax's MAU200 1W DC/DC's
are specially designed to provide
high levels of isolation 3000VDC
in a miniature SIP package.
The series consists of 27 models
with input voltages of 5V, 12V and
24VDC which offers standard output
voltages of 3.3V, 5V, 9V, 12V, 15V,
±5V, ±9V, ±12V and ±15VDC for a
wide choice.
The MAU200 series is an excellent
selection for a variety of applications
including distributed power systems,
mixed analog/digital subsystems,
portable test equipments, local power
networks and battery backed systems.
|
Mechanical Dimensions |
| Pin Connections |
| |
|
Pin |
Singles |
Duals |
|
1 |
+Vin |
+Vin |
|
2 |
-Vin |
-Vin |
|
5 |
-Vout |
-Vout |
|
6 |
No Pin |
Common |
|
7 |
+Vout |
+Vout |
| Case Size – |
| 5V & 12V Input – 19.5x6.1x10.2mm |
|
|
(0.77x0.24x0.40inch)
|
| 24V Input –19.5x7.1x10.2mm |
|
|
(0.77x0.28x0.40inch)
|
| Case Material – |
| Non-Conductive Black Plastic |
| Weight – |
| 5V & 12V Input – 2.2g (0.08Oz) |
| 24V Input– 2.6g (0.09Oz) |
|
Tolerance |
Millimeters |
Inches |
| |
X.X±0.25 |
X.XX±0.01 |
| |
X.XX±0.13 |
X.XXX±0.005 |
|
Pin |
±0.05 |
±0.002 |
| | |
 |
|
|
| | |
|
|
| Absolute Maximum Ratings |
|
Parameter |
Min. |
Max |
Units |
|
Input Surge Voltage (1000mS) |
5VDC Input Models |
-0.7 |
9 |
VDC |
|
12VDC Input Models |
-0.7 |
18 |
VDC |
|
24VDC Input Models |
-0.7 |
30 |
VDC |
|
Lead Temperature
(1.5mm from case for 10sec.) |
--- |
260 |
°C |
|
Internal Power Dissipation |
--- |
450 |
mW | Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings. |
|
| General Characteristics |
| Parameter |
Conditions |
Min. |
Typ. |
Max. |
Units |
| Isolation Voltage |
60 Seconds |
3000 |
--- |
--- |
VDC |
| Isolation Resistance |
500VDC |
10 |
--- |
--- |
GΩ |
| Isolation Capacitance |
100kHz, 1V |
--- |
60 |
100 |
pF |
| Switching Frequency |
|
70 |
100 |
120 |
kHz |
| MTBF |
MIL-HDBK-217F @25°C Ground Benign |
2 |
--- |
--- |
MHrs | | |
| |
| Environmental Characteristics |
| Parameter |
Conditions |
Min. |
Max. |
Units |
| Operating Temperature |
Ambient |
-40 |
+85 |
°C |
| Operating Temperature |
Case |
-40 |
+90 |
°C |
| Storage Temperature |
|
-40 |
+125 |
°C |
| Humidity |
|
--- |
95 |
% |
| Cooling |
Free-Air Convection | |
|
| Output Characteristics |
| Parameter |
Conditions |
Min. |
Typ. |
Max |
Units |
| Line Regulation |
For Vin
Change of 1% |
--- |
±1.2 |
±1.5 |
% |
| Load Regulation |
Io = 20% to 100% |
See Selection Guide
|
% |
Ripple & Noise
|
20MHz BW |
--- |
65 |
100 |
mV P-P |
| Short Circuit |
0.5 Second Max. | |
| |
| |
| Maximum Capacitive Load |
|
Models by Output Voltage
(Each Output on Duals) |
Singles |
Duals |
Units |
|
220 |
100 |
uF | |
| | |
|
|
| Derating Curve (3.3, 5 & ±5V Outputs) |
 | |
|
|
| 1. |
Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted. |
| 2. |
These power converters require a minimum output load to maintain specified regulation. |
| 3. |
Operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. |
| 4. |
All DC/DC converters should be externally fused at the front end for protection. |
| 5. |
Other input and output voltage may be available, please contact factory |
| 6. |
All specifications subject to change without notice. |
| |
| |
| |
| Derating Curve (Other Outputs) |
 | |
|
| |
| | | |
|
|
Designed by Minmax / MSIE5.0 or NS6.2 above / 800 x 600 high color Copyright c 2005 Minmax Technology Co., Ltd. |
| | |
|
